Fishing Industry

Fishing Industry

Technological progress in fishing and increasing demand have resulted in large quantites of fish requiring quick processing. Even on factory ships, many tasks which were performed manually have been mechanized to speed up the process.

During processing, fish waste is prepared for fish meal plants on board or on shore. The pumps required for this activity are exposed to especially harsh and difficult conditions. NEMO® pumps have been specified for many fish processing factories which produce fish meal, fish oil, canned fish and filleted fish over many years.

The material consistency is a main determining factor in pump selection. Industrial pumps are appropriate for materials with low viscosity like fish oil, fish press water and blood water. Higher viscosity materials, like chopped fish, are better managed by using a hopper pump. Even waste products are easily fed into the rotor-stator system by screw conveyers on the coupling rod.

On the sanitary side, NEMO® sanitary or aseptic pump designs are available to meet strict "clean" requirements.

Technical Data

Your device is too small to show this table.
NETZSCH

T.Proc® rotary lobe pump

Taskmaster®- twin shaft macerator

Mediumfish skins
Throughput volume80 m³/h
Pressure2 bar

Products

NEMO® BO Open Throat Progressing Cavity Pump in Block Construction

The NEMO® BO Progressing Cavity Pump with square/rectangular hopper and coupling rod with auger and force-feed chamber is employed in almost all industrial markets to provide continuous, pressure-stable, gentle and low-pulsation conveyance.

NEMO® BF Open Throat Progressing Cavity Pump with Auger

The NEMO® BF is used in all industrial markets to provide continuous, pressure-stable, gentle and low-pulsation handling with metering in proportion to rotation speed. This pump is used primarily for highly viscous, compacted and crumbly substances that do not have a tendency to bridge.

NEMO® SA Aseptic Pump

The NEMO® SA Aseptic Pump is employed for aseptic and sanitary applications in the food, pharmaceutical, cosmetic and chemical/biochemical industries to provide continuous, pressure-stable, gentle and low-pulsation handling and metering.

NEMO® BY

NEMO® BY Progressing Cavity Pumps can be used in industrial markets where a great variety of substances must be pumped or very precisely metered.

Dependable Metered Flow

NEMO® Immersible Pumps are used for emptying barrels, tanks, and pits. They are also used where space is limited and the danger of cavitation may be present. In addition, these pumps are suitable for emptying barrels containing materials hazardous to water and the environment.

NEMO® C.Pro®

The NEMO® C.Pro® Metering Pump is a fully synthetic pump for the precise metering of a great variety of chemicals in environmental and chemical industries. Its synthetic construction makes it perfectly suited for the gentle and low-pulsation handling and metering of aggressive or non-aggressive chemicals.

NEMO® BH Sanitary Pump

The NEMO® BH Sanitary Pump is employed in the food products, pharmaceutical, cosmetic and chemical/biochemical industries for sanitary applications and optimal cleaning. The continuous, pressure-stable, gentle and low-pulsation pumping and metering in proportion to speed are the important capabilities.


Literature