Downstream – NEMO® Multiphase Pumps

Even if the oil sometimes stops coming – NEMO® Multiphase Pumps keep going.


Only very seldom does crude oil arrive at the surface in pure form. Usually it is mixed with water, sand and gas. Conventional pumps require that the gas first be separated from the crude oil. With NETZSCH NEMO® Multiphase Pumps, this is not an issue.
NEMO® Multiphase Pumps can be used for crude oil with a gas content of up to 100%.

Features of NEMO® Multiphase Pumps:

  • employable even if the pumped substance has a high gas content
  • low-pulsation conveyance
  • high suction capability

NEMO® Multiphase Pumps offer you:

  • low life cycle costs
  • low installation costs
  • high pressure stability
  • perfect dosing precision

Advantages of the NEMO® Multiphase Pump

  • can be operated under high conveying pressures
  • can be used even if the oil has a high water content
  • dependable operation even with high-viscosity oils
  • employable for substances with a high solid content


Our Design – Your Advantage: Easy Serviceability, Dependability, Operating Safety



1 Rotor
In wear- and corrosion-resistant designs.

2 Stator
Vulcanized into the tube with sealing on both sides in a variety of elastomers, plastics and metals. Stator inlet with hopper-shaped opening for improved feed of the product into the conveying chamber. The stator is oil-, acid- and alkali-resistant.

3 Drive Chain
Coupling rod and two gimbal joints for the transmission of power from the drive to the rotor.

4 Shaft Seals
Standard with single-acting, bi-directional, wear-resistant mechanical seal. Upon request, with single- or double-acting mechanical seals of varied designs and from various manufacturers, cartridge and special seals as well as packed glands.

5 Suction and Discharge Housing
Flange and threaded connections in accordance with DIN and international standards. Materials in cast iron, steel, chrome-nickel-steel rubberized; also special materials upon request.

6 Block Construction
The drive is flanged directly to the lantern of the pump, resulting in compact dimensions, low total weight, constant axial heights irrespective of the construction type and size of the drive, and ease of maintenance and serviceability as well as high efficiency.

The NETZSCH NEMO® Transfer Pump is available in …

  • cast iron
  • chrome-nickel-steels
  • duplex and super-duplex steels
  • Hastelloy
  • titanium
  • plastics and ceramic materials
  • special materials

… conveys …

  • capacities from a few ml/h to 500 m³/h
  • pressures of up to 48 bar in standard form

…and offers a great variety of shaft seals such as:

  • packed glands
  • shaft sealing rings
  • single-acting, bi-directional mechanical seals with and without quench
  • double-acting mechanical seals (tandem and back-to-back)
  • magnetic coupling
  • thermosiphon systems

Certification / Credentials

  • DIN ISO 9001
  • Certification in accordance with § 19 WHG
  • ATEX Directive
  • GOST R and GOST K
  • Material certifications
  • Test reports
  • Welding certificates
  • Non-destructive material testing
  • Sound level measurement
  • Quality plans
  • Progress reports
  • Other certification and credentials upon request


Downstream – NEMO® Multiphase Pumps

NEMO® Multiphase Pumps are dependable even under the most difficult conditions

NEMO® Multiphase Pumps are simple and safe to operate; elaborate control systems are not needed. The construction material used for the Multiphase Pump will depend upon its field of application, allowing for dependable operation even at the lowest of temperatures.

Wide Spectrum of Applications
The NEMO® Multiphase Pump is used primarily for substances with the following properties…

  • low to high viscosity (1 mPas to 3,000,000 mPas)
  • thixotropic and dilatant
  • shear-sensitive
  • abrasive
  • non-smearing or smearing
  • aggressive (pH 0 to 14)
  • adhesive
  • toxic

… such as

  • crude oil with a high gas content
  • crude oil polluted with water and sand
  • oil/water emulsions
  • water in oil deposits

Additional Features of the NEMO® Multiphase Pump:

  • high suction capability up to 9 mWC
  • bi-directional
  • vertical or horizontal installation
  • low noise, low vibration
  • temperatures from -40°C to 300°C


Accessories to supplement your system offer optimal security

The following accessories are available for NETZSCH NEMO® Multiphase Pumps:

  • A great assortment of shaft sealing systems planned in accordance with API 682 and seal sizes in accordance with API 610
  • Systems for monitoring the conveying pressure
  • Dry running protection units
  • Safety valves
  • Electrical control systems
  • Bypass lines
  • Application-specific baseplates
  • A great variety of drive systems

You may also be interested in:

TORNADO® Industrial Rotary Lobe Pumps T2

The TORNADO® rotary lobe pump is a positive displacement pump. The pumping action is generated by the contra-rotation of two rotors within the pump chamber which are synchronised externally. The media enters the pump chamber through the inlet port and is carried around the chamber by the rotors to the outlet port where it is discharged.

Downstream – NEMO® Water-Injection Pump

Crude oil deposits are often discovered in spongy rock. To extract it, fluids must be pumped into the earth under high pressures. NEMO® Water-Injection Pumps are particularly well-suited for this task, since their capacity can be changed in accordance with rotation speed.