Explosives Industry

Special pump for emulsion explosives

Transalpine rail and road tunnels, dams for hydro-electric and storage power plants – the number of major construction sites which need significant explosive work has increased considerably over recent years.                                  

 

Background

The requirements for explosives have been changing. Higher performance and increased safety are the overriding objectives which are demonstrated above all in the greater use of emulsion explosives. In Switzerland alone – traditionally a country with a great deal of tunnel construction – the ratio changed between 1998 and 2005 from 100 percent explosives in cartridge form to 95 percent pumped emulsions. The benefits are huge: the components, which are not dangerous individually, are not mixed until they are on site. The finished mix fully uses the whole borehole, but also goes into small openings. Certainly, high-performance, customised pumps which meet the special challenges of the emulsion matrix or of the explosive are the basis for this.  

 

Challenge

This type of explosive material certainly requires special conveyance conditions. In the German Accident Prevention and Insurance Association's Regulations (BGV) for solid uniform explosives and for blasting oils, it is for instance stated that pumps should prevent a dangerous strain on the materials or a separation of the emulsion.  

 

Solution

The pump specialist NETZSCH has therefore developed special equipment for mobile mix loading vehicles to convey emulsified explosives. The proven NEMO® SY progressing cavity pump has therefore been extensively reworked to implement the necessary testing possibilities and safety measures. The two inspection openings which have been incorporated above the joints of the coupling rod are the greatest difference with respect to conventional designs. These mean that it is possible to check whether the joints are still sufficiently lubricated and the seals are still intact while the pump is in operation. Otherwise the metal on metal friction could lead to dangerous heat generation. The explosives pumps are ATEX-concurring and built for the individual requirements of the costumer.

Technical Data

Your device is too small to show this table.
NETZSCH NEMO® SY progressing cavity pump
MediumEmulsion explosives

Products

NEMO® SY Industrial Construction in Bearing Block Design with Free Shaft Extension

The NEMO® SY Progressing Cavity Pump is used for demanding applications in every branch of industry around the globe. In bearing block design with free shaft extension, this pump can be run with any type of drive, such as servo motors, diesel motors or hydraulic drives.

NEMO® Pump BY

NEMO® BY Progressing Cavity Pumps can be used in any area of industry where a great variety of different substances must be pumped or very precisely dosed.

NEMO® C.Pro®

The NEMO® N-Ipos CY C.Pro® Dosing Pump is a fully synthetic pump for the precise dosing of a great variety of chemicals in environmental technology and the chemical industry. Its synthetic construction makes it perfectly suited for the gentle and low-pulsation conveyance and dosing of aggressive or non-aggressive chemicals.

TORNADO® Industrial Rotary Lobe Pumps T2

The TORNADO® rotary lobe pump is a positive displacement pump. The pumping action is generated by the contra-rotation of two rotors within the pump chamber which are synchronised externally. The media enters the pump chamber through the inlet port and is carried around the chamber by the rotors to the outlet port where it is discharged.


Literature